Favorite Manufacturers and their Featured Products
We have highlighted three of our favorite manufacturers and some commonly used products.
|
|
![]() |
![]() |
Benjamin Moore
Regal® Eggshell Interior Finish
From Benjamin Moore®: A premium quality coating featuring Advanced Particle Technology (A.P.T.) and 100% acrylic resin that combines the decorative beauty of an eggshell finish with the washability of a semi-gloss. Ideal for applications where a fast-drying, high hiding, durable coating is required. Self priming on most surfaces. View Data Sheet
EcoSpec®
From Benjamin Moore®: Eco Spec® products have been GREENGUARD Interior Air Quality Certified® by the GREENGUARD Environmental Institute under GREENGUARD Standards for Low Emitting Products. These products meet Green Seal Environmental standards for organic compounds (VOCs) and other ingredients. Eco Spec® coatings are 100% acrylic and low VOC, making them ideally suited for commercial, facility management, and residential applications which call for environmentally-friendly coatings. Eco Spec® coatings do not have the odor of conventional paints that contain ingredients known as Volatile Organic Compounds (VOCs). View Data Sheet
100% Solids Epoxy Floor Coating
This 100% solids epoxy floor coating was specially designed for use as a protective coating, resurfacing, and/or for patching surfaces exposed to severe and aggressive industrial environments. Advanced technology has provided us with a tough coating for high abuse areas and also an attractive finish that is easy to maintain. This film offers greater compressive strength than concrete and contains no solvent to cause shrinkage and fire hazard during application. Systems designed for squeegee, roller, brush, hand broadcast, or trowel application. View Data Sheet
Sherwin-Williams
Waterborne Acrylic Dryfall
Waterborne Acrylic Dryfall coating is a highly light-reflective, waterbased coating that surpasses the hiding ability of conventional, solvent-borne dryfall coatings. By falling dry in as little as 10 feet, it reduces overspray nuisance, waste and clean up. The fast-drying, modified acrylic resin is designed for use on aluminum, concrete block, steel, galvanized steel, masonry, wood and previously painted surfaces. View Data Sheet
DTM Acrylic
An acrylic emulsion, waterborne, corrosion resistant coating for new construction and industrial maintenance applications. Can be used as a primer under most water base topcoats or alone as a primer/topcoat system. Develops excellent early moisture resistance and has excellent exterior durability. It can be used directly over numerous substrate types. Chemical Resistant - Fast dry - Flash/Early Rust Resistant. View Data Sheet
Conflex XL
Application is uniform, smooth and efficient, resulting in a pinhole-free finish with less labor. The thick, elastic film hides hairline cracks, patches and surface irregularities. ConFlex XL eliminates the passage of water to interior surfaces, even in wind-driven rain. View Data Sheet
Tnemec
Series 10 | Tnemec Primers
Chemically active, rust-inhibitive primer for ferrous metals. Provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates. View Data Sheet
Series 30 | Spra-Saf EN
An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early flash-rust resistance, as well as long term corrosion protection and weathering properties. Formulated to resist mildew growth on the paint film. Provides good gloss and color retention on structural steel, tanks, towers, pipes and similar structures. May also be used on a wide range of other substrates and many aged coatings, interior or exterior (test patch is recommended per Technical Bulletin 98-10). Application methods include “dry-fall” under certain conditions (see Application).
Note: Spra-Saf EN’s “dry-fall” characteristics help reduce the potential for overspray problems on buildings and surrounding property. View Data Sheet
Series 66 | Hi-Build Epoxoline
Industry standard for epoxy coatings for over 30 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance. View Data Sheet
© 2008-2009 Arch Painting, Inc. All Rights Reserved.



